28SPAS-100 Automatic Can Seaming Machine

There are two model of this automatic can seaming machine, one is standard type, without dust protection, the can seaming speed is fixed; the other one is high speed type, with dust protection, speed is adjustable by frequency inverter.

Equipment Description

This vacuum can seamer or called vacuum can seaming machine with nitrogen flushing is used to seam all kinds of round cans like tin cans, aluminum cans, plastic cans and paper cans with vacuum and gas flushing. With reliable quality and easy operation, it is ideal equipment necessary for such industries as milk powder, food, beverage, pharmacy and chemical engineering. The machine can be used alone or together with other filling production lines. 

Technical Specification

• Sealing diameterφ40~φ127mm，sealing height 60~200mm；
• Two working modes are available: vacuum nitrogen sealing and vacuum sealing；
• In the vacuum and nitrogen filling mode, the residual oxygen content can reach less than 3% after sealing, and the maximum speed can reach 6 cans / minute (the speed is related to the size of the tank and the standard value of the residual oxygen value)
• Under vacuum sealing mode, it can reach 40kpa ~ 90Kpa negative pressure value, speed 6 to 10 cans / min；
• The overall appearance material is mainly made of stainless steel 304, with a thickness of 1.5mm；
• Plexiglass material adopts imported acrylic, thickness 10mm, high-end atmosphere；
• Use 4 rollers cans for rotary sealing, the sealing performance index is excellent；
• Use PLC intelligent program design plus touch screen control, easy to use and set up；
• There is lack lid alarm prompting function to ensure efficient and uninterrupted work of the equipment；
• No cover, no sealing and failure detection shutdown, effectively reducing equipment failure；
• The drop lid part could add 200 pieces at a time (one tube)；
• Change can diameter need to change mould, the replacement time is about 40 minutes；
• Change can diameter need to change mould：chuck+clamp can part+drop lid part，different material can and lid need to change roller；
• change can height，it do not need to change mould，adopt hand-screw design, effectively reduce the fault, the adjustment time is about 5 minutes；
• Strict testing methods are used to test the sealing effect before delivery and delivery to ensure product quality；
• The defect rate is extremely low, iron cans are less than 1 in 10,000, plastic cans are less than 1 in 1,000, paper cans are less than 2 in 1,000；
• The chuck is quenched with chromium 12 molybdenum vanadium, the hardness is more than 50 degrees, and the service life is more than 1 million cans；
• The rolls is imported from Taiwan. The hob material is SKD Japanese special mold steel, with a life span of more than 5 million seals；
• Configure the conveyor belt with a length of 3 meters, a height of 0.9 meters, and a chain width of 185mm；
• Size: L1.93m*W0.85m*H1.9m，packaging size L2.15m×H0.95m×W2.14m；
• Main motor power 1.5KW / 220V, vacuum pump power 1.5KW / 220V, conveyor belt motor 0.12KW / 220V total power: 3.12KW;
• The net weight of the equipment is about 550KG, and the gross weight is about 600KG；
• Conveyor belt material is nylon POM；    
• The air compressor needs to be configured separately. The power of the air compressor is above 3KW and the air supply pressure is above 0.6Mpa；
• If you need to evacuate and fill the tank with nitrogen, you need to connect with an external nitrogen gas source, the gas source pressure is above 0.3Mpa；
• The equipment is already equipped with a vacuum pump, no need to purchase separately.

Equipment details